DIN EN 61788-19:2014-09

This part of IEC 61788 covers a test method detailing the tensile test procedures to be carried out on reacted Cu/Nb₃Sn composite superconducting wires at room temperature. This test is applied to measure the modulus of elasticity and to determine the proof strength of the composite due to yielding of the copper and the copper tin components from the stress versus strain curve. Furthermore, the elastic limit, the tensile strength, and the elongation after fracture can be determined by means of the present method, but they are treated as optional quantities because the measured quantities of the elastic limit and the elongation after fracture have been reported to be subject to significant uncertainties according to the international round robin test. The sample covered by this test procedure should have a bare round or rectangular cross-section with an area between 0,15 mm² and 2,0 mm² and a copper to non-copper volume ratio of 0,2 to 1,5 and should have no insulation. The responsible committee is K 184 "Supraleiter" ("Superconductors") of the DKE (German Commission for Electrical, Electronic and Information Technologies) at DIN and VDE.