Short description
1.1 This guide applies to the design of systems for oxygen or oxygen-enriched service but is not a comprehensive document. Specifically, this guide addresses system factors that affect the avoidance of ignition and fire. It does not thoroughly address the selection of materials of construction for which Guides G63 and G94 are available, nor does it cover mechanical, economic or other design considerations for which well-known practices are available. This guide also does not address issues concerning the toxicity of nonmetals in breathing gas or medical gas systems. Note 1: The American Society for Testing and Materials takes no position respecting the validity of any evaluation methods asserted in connection with any item mentioned in this guide. Users of this guide are expressly advised that determination of the validity of any such evaluation methods and data and the risk of use of such evaluation methods and data are entirely their own responsibility. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This standard guide is organized as follows: Section Title Section Referenced Documents 2 ASTM Standards 2.1 ASTM Adjuncts 2.2 ASTM Manuals 2.3 NFPA Documents 2.4 CGA Documents 2.5 EIGA Documents 2.6 Terminology 3 Significance and Use 4 Purpose of G88 4.1 Role of G88 4.2 Use of G88 4.3 Factors Affecting the Design for an Oxygen or Oxygen- Enriched System 5 General 5.1 Factors Recognized as Causing Fires 5.2 Temperature 5.2.1 Spontaneous Ignition 5.2.2 Pressure 5.2.3 Concentration 5.2.4 Contamination 5.2.5 Particle Impact 5.2.6 Heat of Compression 5.2.7 Friction and Galling 5.2.8 Resonance 5.2.9 Static Electric Discharge 5.2.10 Electrical Arc 5.2.11 Flow Friction 5.2.12 Mechanical Impact 5.2.13 Kindling Chain 5.2.14 Other Ignition Mechanisms 5.2.15 Test Methods 6 System Design Method 7 Overview 7.1 Final Design 7.2 Avoid Unnecessarily Elevated Temperatures 7.3 Avoid Unnecessarily Elevated Pressures 7.4 Design for System Cleanness 7.5 Avoid Particle Impacts 7.6 Minimize Heat of Compression 7.7 Avoid Friction and Galling 7.8 Avoid Corrosion 7.9 Avoid Resonance 7.10 Use Proven Hardware ...